do not scale from this print .1200 ref 3.048 .0550 1.397 .0100 ref 0.254 .0060 ref 0.152 "a" "a" -lc: locking clip option shown lc-08-tm-01 see note 11 .2450 6.223 ref .2850 ref 7.239 .0200 ref 0.508 .1500 ref 3.810 + .2468[6.3]} {(no of positions x .01969[.50]) (no of positions -1) x .01969[.50] .1332 ref 3.384 .042 ref 1.07 .0197 .003 (typ) 0.500 0.08 bsh-xxx-01-d c2 02 01 **= see note 10 bsh-xxx-01-x-d-xx-xx no of positions -030, -050, -060, -090, **-120, **-150, *-180 (per row) row specification -d: double (use bsh-xxx-01-d) option -a: alignment pins (use bsh-xxx-01-d-a) -lc: locking clips (use lc-08-tm-01) plating specification -f: flash selective gold with matte tin tails (see notes 7, 9 & 12) -l: light selective gold with matte tin tails (see note 9 & 12) -h: heavy gold with flash gold tails (see note 9 &12) -c: electro-polished selective (see note 9 &12) lead style -01: .1280 [3.25] option -tr: tape & reel (120 position max) * = not released for production .070 ref 1.765 .0980 ref 2.489 .1280 - .0010 + .0030 3.251 - 0.025 + 0.076 (see note 6) .2950 ref 7.493 .0425 ref 1.080 section "a"-"a" scale 5 : 1 c3 c1 c-126-21-x (see note 12) see table 1 .0350 ref 0.889 (no of positions x .01969 [.5001]) + .2018 [5.126] ref -a: alignment pin option shown bsh-xxx-01-d-a see note 11 .0375 0.953 ref .0375 ref 0.953 r sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.25] 2 .xxx: .005 [.13] .xxxx: .0020 [.050] material: .5mm double row socket assembly by: bsh-xxx-01-x-d-xx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 06/08/1999 2 1 sheet scale: 1:0.666667 insulator: black lcp contact: phos bronze f:\dwg\misc\mktg\bsh-xxx-01-x-d-xx-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. note deleted. 3. burr allowance: .0015 [.038] max. 4. minimum pushout force: 6 oz. 5. maximum allowable bow: .002 [.051] inch/inch after assembly. 6. max varience of .002 [.051] 7. -l plating can be substituded for -f plating. 8. asp-65067-01 is a bsh-050-01-l-d-a. with or without -tr. 9. may substitute c-126-01-x for c-126-21-x. 10. for newapplications requiring these positions, please contact samtec interconnect processing group. 11. side walls may be ribbed to avoid bow 12. -120 & -150 position parts use c-269-01-x. do not sub c-126-xx-x. c flammability rating: ul 94v-o 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision w
w tube: pt-1-24-02-78 plug: tp-09 tape and reel packaging view 2.205 55.999 ref .630 16.00 user direction of un-reeling pocket not detailed "b" "b" tube packaging view position 1 section "b"-"b" scale 1 : 1 [parts to have position #1 loaded in same direction as arrow] sheet of .5mm double row socket assembly by: bsh-xxx-01-x-d-xx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 06/08/1999 2 2 sheet scale: 1.5:1 revision w f:\dwg\misc\mktg\bsh-xxx-01-x-d-xx-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
